Till sidans innehåll

Showtec NET-2/5 Pocket

58

Network Router

The Showtec NET-2/3 Pocket and NET-2/5 Pocket are state-of-the-art network routers that transform Artnet and SACN data into DMX-512 signals and vice versa. Power can be supplied via PoE and thus without the 12V power adapter. A maximum of 1024 channels can be transmitted via a simple CAT5 cable. All settings can be made with the clear menu on the graphic display with the buttons on the front.

Connections:

  • Network: RJ45
  • DMX: 2 x XLR 5-pin
  • Supported protocols: ArtNET, sACN, TCP / IPv4, DMX-512A
  • Dimensions: 67 x 115 x 44 mm
  • Power supply: 12 V DC, 500 mA (mains adapter included)
  • Power consumption: max. 6 W
  • Operating temperature: 0 to + 40° C
  • Weight: 335 g
Tillgänglig sedan Juli 2019
Artikelnummer 470296
försäljningsenhet 1 Styck
Type Ethernet-Interface
Type of construction Desktop
Connection for PC/Ethernet RJ45
Universes (Outputs) 2
DMX-Output 5-pole XLR female
DMX-Input through Output
RDM-capable No
Internal memory No
2 089 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
1

58 Kundbetyg

4.8 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

funktioner

hantverkskvalitet

41 Recensioner

l
Works great!
linush 24.01.2020
I use this dongle with the lighting software Onyx and it works great. Onyx doesn't auto-discover it, but with a little knowledge about networking and IPs this shouldn't be a problem for anyone. If you don't know how that works maybe try a usb variant instead.

I simply set mine to a static IP, and plug directly into it from my laptops ethernet jack. Then I set my artnet broadcast to that IP.
It has a basic GUI in your browser that you can change the settings with, or with the onboard buttons.

I honestly believe this product is the go-to dongle for intermediate LDs. It's much more reliable than most USB dongles I've tried. As we all know most USB dongles use a USB micro port, and those tend to break(i've broken about 2 so far) but because this uses normal ethernet cabling all you need is an ethernet jack on your PC and you're good to go.

It does need its own separate power if not powered over PoE, but it's a pretty standard 12v adapter, which aren't hard to replace if it does break.

Good stuff.
funktioner
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

k
Stabil och enkel att använda
kyrkteknikern 03.01.2021
Fungerar bra. Enkel att sätta upp och få att fungera. Knapparna på vår satt lite snett dock vilket är lite tråkigt och känns lite halvdana, men i övrigt känns den stabil.
funktioner
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
E
Works well
EBLX 04.04.2022
A handy tool for controlling lights without having to invest in a lighting desk or to use as a backup. I am using it with a laptop running MA Lighting's Dot2 and it has not failed me yet. It does feel a bit cheap but you do get what you pay for and in this case, the price makes this product well worth it.
funktioner
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
D
Well made, but RDM did not work at all
DMXKing 29.01.2025
I bought this device specifically for its RDM capabilities, and wasted hours testing with various fixtures and software but to no avail.

The major issue is there is no Firmware updates available, the device ships with v.1.3 and on the website is only v1.1 available, so they have never published any updated - however, regardless of the firmware RDM simply does not work at all. I asked a colleague who has one to check theirs and they had the exact same problem, it looks like it is simply not enabled in the firmware.

Contacting the producer is impossible, they have no means of contact and neither does the parent company. Just a wholesaler who has zero intention of customer service.

Otherwise, cannot fault the Artnet, worked perfectly and the LCD Display was very convenient, but if you need RDM... best check it carefully.

Other than this it is well made, can't complain about the manufacturing quality or the finishing, tough ar rugged overall.
funktioner
hantverkskvalitet
1
0
Anmäl recension

Anmäl recension