Med våra cookies vill vi erbjuda dig den bästa möjliga shoppingupplevelsen med allt som hör till. Detta inkluderar till exempel lämpliga erbjudanden, personliga annonser och att komma ihåg preferenser. Om detta är okej för dig, godkänn helt enkelt användningen av cookies för preferenser, statistik och marknadsföring genom att klicka på "Okej!" (visa alla). Du kan när som helst återkalla ditt samtycke via cookieinställningarna (här).
Pedals with higher voltage requirements can use this voltage doubler cable to combine two isolated power supply multi-outputs and thus provide 18 V or 24 V
Suitable for various MXR Dunlop Fulltone and Keeley pedals
Power supply: 2 x 2.1 mm coaxial
Pedal connector: 2.1mm coaxial
Polarity: Standard (center minus)
Length: 46 cm
Spänningsfördubblingskabel
Pedaler med högre spänningskrav kan använda denna spänningsdubbleringskabel för att kombinera två isolerade strömförsörjningsmultiutgångar och därmed ge 18 V eller 24 V
Lämplig för olika MXR Dunlop Fulltone och Keeley pedaler
I needed this to be able to power my 18 Volt MXR EQ from a Voodoo Labs Pedal Power 2 Plus with 9 Volt isolated outputs. Works perfectly just as intended.
I purchased this product to allow a Decibel 11 Hot Stone Deluxe to power a Pigtronix Echolution 2 delay pedal.
The pedal required 18v whereas the power supply was only able to provide 9v.
Despite being made by Voodoo Lab this adapter will work with any power supply which uses the standard Boss style connectors.
It has worked flawlessly in operation and appears to be made to a high standard. I have had no issues with noise etc.
Though it is advertised for use with pedals such as the OCD I would recommend it more for pedals like the Echolution 2 which require both 18v and a significant amount of current.
There are adapters from other manufacturers which will only take up a single output from your power supply and can output 18v however these are typically limited to 30mA and so can only be used with low current pedals.
This cable can also be used to provide 24v by combining two 12v outputs although it won't provide the reverse polarity that some pedals of this voltage require.
I bought this cable as to be able to supply 18v to my Fulltone Supa-Trem2 V2 which can function at this voltage in order to provide more headroom. It works flawlessly.
Pros: High quality as usual in Voodoo Labs products
Cons; None