Till sidans innehåll

ObsidianWire T 3-Way Universal Harness

11

Solderless Electronics Replacement Set for Electric Guitar

  • For T-style electric guitars with humbucker
  • 4 Optimised modes: HH, HS, SH & SS
  • Intelligent circuit: 500 kOhm for humbucker and 250 kOhm for single coil
  • Treble bleed prevents treble loss at low volume control settings
  • Controls: Volume, tone
  • Switch positions: 1: bridge, 2: bridge & neck, 3: neck
  • With the highest quality components for a significant improvement over standard electronics
  • Made in New Zealand

Delivery contents:

  • Volume control: 1 x CTS 500/250 kOhm, logarithmic, fine grooved split shaft (24 spline for US guitars & potentiometers)
  • Tone control: 1 x CTS 250 kOhm, logarithmic, finely grooved split shaft (24 Spline for US guitars & potentiometers)
  • Capacitors: 150 series polyester 0.022µF
  • Switch: Oak Grigsby 3-way switch
  • Jack socket: 6.3 mm mono
Tillgänglig sedan Januari 2024
Artikelnummer 580493
försäljningsenhet 1 Styck
Design Normal
Resistance Value 500/250 kOhm
Characteristic Curve Logarithmic
Thread Length in mm 9,5 mm
Tandem Poti No
Push/Push No
Solderless Yes
shaft type grooved
Type Switcher
Colour Silver
Visa mer
1 259 kr
Alla priser inklusive moms
i lager
i lager

Produkten finns i lager och kan levereras omgående.

Information om leveransen
1

11 Kundbetyg

4.9 / 5

Du måste vara inloggad för att kunna betygsätta en produkt.

Obs! För att undvika att betygsättningen är byggt på rykten eller smygreklam kan bara kunder som har köpt produkten från oss sätta sitt betyg.

Efter inloggningen i kundcentret kan du se vilka produkter som kan betygsättas.

hantverkskvalitet

9 Recensioner

E
Prisvärd, effektiv och smidig uppgradering
ErikSV 06.05.2024
Satte in detta i min HPD-tele som hade riktigt kass elektronik från början, och det blev ett jävla lyft. Installationen gick någorlunda snabbt och även om jag råkade göra några fel så var det smidigt att gå tillbaks och rätta till. Gitarren lät genast bättre och framförallt volympotten är extremt jämn genom alla nivåer. Rekommenderar starkt för en smidig och någorlunda billig uppgradering till billigare gitarrer!
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
m
Recommended if you don't like soldering
mutaatio 01.01.2025
I'm not a fan of soldering so I decided to give this solderless harness a try in my new partscaster. It's a very crafty design, there is a small dial which you can use to set the desired resistance for each of the pickups separately, either 250K (single coil) or 500K (humbucker).

Instructions were quite simple, but after I assembled everything I got no sound. I checked every connection with multimeter and disconnected and reconnected everything. It took a while to find the problem: the output jack connector is very tight and there is a step before the input jack is in place. I thought I had the cable connected because of this, but in fact it was only in the first step and I had to push it ever further down.

Aside from the unusual input jack design, my only complaint is the quality of the quick connector for the pickup wires. It doesn't feel too sturdy and if you try out new pickups often, it might not last very long. The switch also has a bit of play in the lever, but works well enough.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate gb
Tyvärr uppstod ett fel. försök igen senare.
K
If you’re looking for flexibility…
Kokkaya 09.06.2024
This is the harness for you.
I wrote a rather neutral review for Obsidianwire earlier this year (for single cut harness) because of too soft of pots and mediocre 3 way toggle switch.
This time they nailed it. The cap is 0.22nF, which I like a lot for single coils and not many suppliers provide S or T type harnesses with 0.22. Plus, you can go 500K or 250K with pots. You can even assign 250 and 500 to different pickups thanks to the clever circuit. This is a very flexible and usable harness. Switch, output jack and solderless terminal are of good quality.
Important points that are not mentioned in the product description:
The pots are split shaft but solid shaft ferrules are included in the package! Which is a very good thing as you can use your screwed in standard tele knobs.
And switch screws are also included in the package. This is a huge bonus again. Switch tip was included in the single cut harness but is not included this time.
Overall, I like this purchase. Many thanks Thomann for carrying all this kinds of stuff.
hantverkskvalitet
0
0
Anmäl recension

Anmäl recension

google translate de
Tyvärr uppstod ett fel. försök igen senare.
MF
Schnell, Gut und Effektiv
Marvin Fo. 07.04.2024
Habe mir das vorverdrahtete Bestellt da ich keine Lust hatte alles selbst zu verlöten. Faulheit kostet eben :)

Erstmal zum Umbau. Also die Anleitung die dabei ist, ist wirklich sehr einfach gehalten. Man sollte sich das ganze nur genau anschauen. Ich habe versucht die falsche Schaltung zu nutzen bis ich gesehen habe das es ja verschiedene Möglichkeiten gibt. Naja Augen aufmachen ;)

Alles eingebaut und getestet. Kein Rauschen und ein wunderbar klarer Ton. Ich bilder mir ja fast ein das es tatsächlich etwas besser ist als vom großen F.

Ich werde es für zukünftige Umbauten aufjeden Fall wieder kaufen! Klare Kaufempfehlung!
hantverkskvalitet
2
0
Anmäl recension

Anmäl recension